Evaluation Kits
Evaluation Kit Single-Pixel
The evaluation kit enables users to easily compare different varieties of the Hertzstück™ detectors and to quickly develop circuit designs for their applications.
- 2 input channels
- 48 kHz sampling rate
- 16 bit resolution
- powered and controlled directly over USB
Package includes software performing real-time FFT and statistics analysis. The standard version is equipped with 2 mm x 2 mm bare chip PbS or PbSe detectors, other detector geometries are available upon request.
Evaluation Kit Multi-Pixel & Multi-Single-Pixel
The evaluation kit enables users to easily test the Hertzstück™ Multi-Pixel and Multi-Single-Pixel detectors.
Evaluation kit characteristics:
- Up to 16 input channels
- 16 kHz sampling rate
- 16 bit resolution
- powered and controlled directly over USB
The evaluation kit can be equipped with different PbS Multi-Pixel detector chips ranging from 4 to 16 detector pixel. The stock geometries are (Pixel Width x Pixel Length _ Pitch):
- 4 Pixel: 610x2200_620
- 8 Pixel: 1420x2200_1430
- 16 Pixel: 610x2200_710
Other detector geometries are available upon request.
A second option is to equip the evaluation kit with eight 2x2 mm Multi-Single-Pixel detectors, either with PbS or PbSe detectors. Optional a filter mount is available for rapid testing of the intended application.
The Multi-Single-Pixel detectors are applied on an extra PCB which can be plugged into the intended socket on the evaluation board.
The data recorded from Multi-Pixel and Multi-Single-Pixel detectors can be evaluated in respect of signal and noise at different modulation frequencies. A modulated source is not supplied, software and instructions will be provided.
Evaluation Kit Line Array
The evaluation kit enables users to easily test the Hertzstück™ Line Array detectors with 256 Pixels and to quickly develop circuit designs for their applications.
- Selectable charge well size from 1pF to 20pF
- Integration time selectable from 4µs to 200ms
- Sampling frequency from 1 to 1024 Hz
- Adjustable detector bias voltage
- TEC Controller on board
- Temperature range from 0 to 45°C
- TEC Controller PID values adjustable
- Powered and controlled directly over USB
The package includes software performing real-time FFT and statistics analysis.